Basic operation
Before viewing a video/picture from your iPod on your monitor:
Make the appropriate video setting on iPod. For details of the setting, see the instruction manual for iPod.
| STANDBY lamp | iPod |
|
| |
Turn on 1 |
| 2 Select a source. |
|
| |
the power. |
|
|
Notes on iPod connection
•When detaching the dock adaptor from the dock, pull up the dock adaptor with your fingernail or sharp pointed tool using the slot.
Be careful not to injure your fingertips or damage the terminal of the direct dock.
•DO NOT connect or disconnect the iPod when the System is turned on.•Be sure to reduce the volume on the System to the minimum level before connecting iPod. Adjust the volume after starting playback.
•You cannot send any data to the iPod from the System.•Do not carry the System with iPod connected. It might cause damage to the dock or you might drop the iPod.
•Do not touch or hit the iPod terminal pins or connector pins in the dock for iPod directly. Doing so might cause damage to the connector pins.
•iPod is charged through the dock when the System is turned on.•When two iPod devices are connected, both iPod devices are charged.or
*Information shown on the display differs depending on the type of the iPod.To play back/pause iPod
Press iPod A 6 or iPod B 6.
To select a track
Press 4 or ¢.To fast-forward a track
Press and hold ¡.To fast-reverse a track
Press and hold 1.To play back at random
Press RANDOM repeatedly.–If you hold RANDOM when two iPod devices are connected to the System, “SHUFFLE” appears on the display and Random Play applies to both iPod devices.
To play back repeatedly
Press REPEAT repeatedly.To put iPod in sleep mode
Press and hold iPod A 6 or iPod B 6.To display the menu/to go back to the previous menu
To select an item on the menu
UP | DOWN | SET |
|
Notes:
•Operate iPod touch itself in the following cases:–When operating the home button.–When selecting application icons on the home screen.–When dragging the slider.•Sound distortion may occur when playing back audio sources with high recording levels. If distortion occurs, it is recommended to turn off the equalizer of iPod. For information on operating iPod, see the instruction manual for iPod.
3
Remote sensorStereo mini plug cord (not supplied)The HP indicator is displayed when headphones are connected to the System.•Be sure to turn down the volume before connecting or putting on the headphones.
DO NOT turn off the System with the volume set to an extremely high level; otherwise, the sudden blast of sound may damage your hearing, speakers, and headphones when you turn on the System or start playback.
Searching for stations1
| 1 |
Adjust the volume. | 2 |
2 3
Headphones (not supplied)When you connect iPod to the dock, CONNECT is shown on the display first, followed by AUTHRSNG and then SUCCEED. You can play iPod after SUCCEED is shown.
Label sideTUNER FM | AUDIO IN |
2
When you start playback again, it starts from the beginning of the stored track.
FM radio | The station search stops when a station of |
| |
| sufficient signal strength is found. |
| • To manually stop the search, press 4 or ¢. |
| • When you press 4 or ¢ repeatedly, the |
| frequency changes step by step. |
| • When an FM program is |
| broadcast in stereo, the S (stereo) |
| indicator lights up. |
External
device
Stereo mini plug cord (not supplied)
Disc
Playback operations
To play back/pause a disc
To open the disc tray
Press 0 on the main unit.No indicator | Cancels. |
While playback is stopped...
While the System is on standby...
(On the main unit)
•When the monaural mode is activated, the reception is improved. However, the stereo effect is lost.
•To restore the stereo effect, press TUNER MODE again.Presetting stationsYou can preset up to 30 FM station.While listening to a target station...
1
Preset number2Select a preset number.
UP DOWN
3
SET
Tuning in to a preset stationUP DOWN
1
TUNER FM AUDIO IN2Start playback of the external device.Adjusting the audio input levelYou can change the audio input level through the AUDIO IN jack.SET
(Hold)
LEVEL 1LEVEL 3 LEVEL 2•The playback sound is the maximum when you select LEVEL3.To select a track
Press ¢ or 4.To
To
Press 1.
• To stopTo select a group
Press UP or DOWN.To stop playback
Press 7.
1
2Select a track number (up to 32 tracks).
SET
• To cancel, press MENU/CANCEL.3
•To check the programmed contents, press SET repeatedly while playback is stopped.
•To exit Program Play, press 7 while playback is stopped.– The stored program is erased.(While holding 7) LOCKED |
| UNLOCKED |
|
2