JVC LYT0002-048A GETTING STARTED cont, Viewfinder Adjustment, Insert Battery, Close Cover

SWITCH OFF POWER

Switch off the unit’s power and remove the power supply unit.

OPEN COVER

Open the clock battery compartment cover while pressing the release tab.

REMOVE BATTERY (when replacing)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to perform date/time settings.

8

GETTING STARTED (cont.)

A

1

2

3 Insert a pointed, non-metallic object between the battery and the compartment ( A ) and pull the battery out.

INSERT BATTERY

4 Ensuring the plus (+) side is up, insert a CR2025 lithium battery and push it in.

CLOSE COVER

5 Close the compartment cover until it clicks in place.

NOTE:

See “SAFETY PRECAUTIONS” (☞ pg. 2) for information on safe handling of lithium batteries.

3

1

2

Set POWER to “CAMERA”.

Viewfinder Adjustment

POSITION VIEWFINDER

1 Adjust the viewfinder manually for best viewability (see illustration at left).

SELECT MODE

2 Set the power switch to CAMERA.

ADJUST DIOPTER

3 Turn the diopter adjustment control until the indications in the viewfinder are clearly focused.