IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful func- tions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instruc- tions. For your safety, please read all the safety and operating instructions before you operate this product and keep this manual for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

EN3

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND CLAMP

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 2 Page 4
Page 3
Image 3
JVC LYT0047-001A manual Antenna Installation Instructions
Page 2 Page 4

LYT0047-001A specifications

The JVC LYT0047-001A is a high-quality replacement battery designed specifically for JVC camcorders, enabling users to capture moments without interruptions. This battery exemplifies the brand's commitment to excellence and innovation in the field of video technology. With a robust design, it ensures reliability and longevity, making it an ideal companion for both professional videographers and enthusiasts.

One of the main features of the JVC LYT0047-001A is its substantial capacity, which offers a long life that allows users to record extensive footage without the need for frequent recharging. The impressive energy density ensures that users can rely on it during extended shoots, whether in a studio setting or out in the field. With a straightforward design, the battery is easy to install and remove, allowing for quick swaps when necessary.

The battery incorporates advanced lithium-ion technology, which provides numerous advantages over older battery types. Lithium-ion batteries are known for their lower self-discharge rates, meaning they retain their charge for much longer when not in use. This is particularly beneficial for users who may not use their camcorders regularly but still want the reliability of a fully charged battery when the moment strikes.

The JVC LYT0047-001A also features built-in protection mechanisms that guard against overcharging, overheating, and short-circuiting. This safety aspect not only extends the lifespan of the battery but also protects both the camcorder and its operator. Additionally, the battery's lightweight nature makes it convenient for portable use, contributing to a more manageable shooting experience.

Another characteristic of the JVC LYT0047-001A is its compatibility with various JVC camcorder models, facilitating easy integration into existing setups. This versatility makes it a favored choice among users with multiple JVC devices, streamlining their equipment management.

In conclusion, the JVC LYT0047-001A is a powerful and reliable battery solution designed to enhance the performance of JVC camcorders. Its long-lasting capacity, advanced lithium-ion technology, and robust safety features make it an essential accessory for anyone serious about video production. Whether shooting a family event or a professional project, users can count on this battery to deliver the power they need to capture every moment.
Top Page Image Contents