5.Plug the charger into an electrical outlet. Both SIDE A and SIDE B lights turn red, indicating that the charger is working.

When the batteries are fully charged, after about two and a half hours, the lights go off. To charge your batteries again, open and then close the charger again.

Notes:

Do not open the battery charger cover while charging.

The charger lights flash to indicate changes in battery temperature and voltage. If the charger lights continue to flash more than half an hour, the batteries may be damaged or worn out. Replace them with four new AA Ni-Cd batteries.

6.After both SIDE A and SIDE B lights go off, unplug the charger. To avoid overcharging, don’t leave the charger plugged in for long periods of time after the lights go off.

7.Just after charging, the batteries are very hot (approximately 65°C (149°F)). Wait one hour until the batteries cool before removing them from the charger.

8.Before storing the charger, close the retractable plug.

ENGLISH

11

Page 11
Image 11
JVC BH-VC20U, LYT0221-001A manual English