JVC AA V50U manual Supply Power to Charger, Attach BATTERY/BATTERIES, Confirm Status, One Two

1

2

3

SUPPLY POWER TO CHARGER

Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/ Charger.

Plug the AC Adapter/Charger’s power cord into an AC outlet. The power lamp comes on.

ATTACH BATTERY/BATTERIES

Attach the battery pack while making sure its terminal side 1 is in contact with the indicator side of the battery pack mount on the AC Power Adapter/Charger.

•The Charger Indicator (1 or 2) begins blinking to indicate charging has started.

CONFIRM STATUS

When the charger indicator stops blinking but stays lit, charging is finished.

•If two batteries are attached to the charger, they will be charged in the order that they were attached.

4 DETACH BATTERY/BATTERIES Slide the battery or batteries in the opposite direction of the arrow and lift off. Remember to unplug the AC Adapter/ Charger’s power cord from an AC outlet.

NOTE:

Perform charging where the temperature is between 10° and 35°C. (20°–25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.

BATTERY PACK CHARGING TIME

Battery pack	ONE	TWO
BN-V507U	approx. 1 hr.	approx. 3 hrs.*
	30 min.*
BN-V514U	approx. 3 hrs.*	approx. 6 hrs.*

*When charged at temperatures between 20° and 25°C.

•When charging Battery Packs after a long storage period, charging time will be longer than the time indicated above.

EN-5