NOTES:
●The time code cannot be reset.
●During
●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 32)
Quick Review
Enables to check the end of the last recording.
1)Press QUICK REVIEW during the Recording- Standby mode.
2)Tape is rewound for about several seconds and played back automatically, then pauses in the
● Distortion may occur at start of playback. This is normal.
Recording From The Middle Of A Tape
1)Play back a tape or use Blank Search
( pg. 22) to find the spot at which you want to start recording, then engage the Still Playback mode. (See the right column.)
2)Set the Power Switch to “REC” while pressing down the Lock Button located on the switch, then start recording.
VIDEO PLAYBACK EN 21
Normal Playback
¡
VOL. +/–
6Lock Button
1 
Speaker |
| |
VIDEO/ |
| |
MEMORY |
| |
MENU |
| |
7 |
| |
1 Load a cassette. ( pg. 18) |
| |
2 Set the VIDEO/MEMORY Switch to “VIDEO”. |
| |
3 Set the Power Switch to “PLAY” while |
| |
pressing down the Lock Button located on the | PLAYBACK | |
switch. | ||
4 To start playback, press 6. | ||
5 To stop playback, press 7. | ||
● During Stop mode, press 1 to rewind, or ¡ to | & | |
RECORDING | ||
To control the speaker volume | ||
Slide the Power Zoom Lever (VOL. | ||
“+” to turn up the volume, or towards | ||
down the volume. | ||
VIDEO | ||
NOTES: | ||
● The playback picture can be viewed in the LCD | ||
monitor, viewfinder or on a connected TV. |
| |
( pg. 23) |
| |
● If Stop mode continues for 5 minutes when power |
| |
is supplied from a battery, the camcorder shuts off |
| |
automatically. To turn on again, set the Power |
| |
Switch to “OFF”, then to “PLAY”. |
| |
● When a cable is connected to the AV connector, |
| |
the sound is not heard from the speaker. |
|
Still Playback
Pauses during video playback.
1)Press 6 during playback.
2)To resume normal playback, press 6 again.
● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.