JVC LYT1624-001B Connection To A Personal Computer, [B] Using DV cable, [A] Using USB cable, NEVER disconnect the USB cable while, [A] Using USB cable [B] Using DV cable

EDITING EN 41

	Connection To A Personal Computer	[A] Using USB cable
		[A] Using USB cable
		It is possible to transfer still images stored on a


[A] Using USB cable [B] Using DV cable		memory card to a PC.
[A] Using USB cable [B] Using DV cable

	To USB	To DV
		IN/OUT
	Core ﬁlter	Core ﬁlter
	USB cable	DV cable
	(provided)	DV cable
	(provided)	(optional)
		(optional)
		Core ﬁlter
	To USB	To DV connector
	connector	To DV connector
	connector

PC	PC with DV connector

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

●Connect the DV cable ﬁrst to the PC, and then to the camcorder.

●Connect the DV cable (plugs) correctly according to the shape of the DV connector.

[B] Using DV cable

It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.

If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND PC CONNECTION GUIDE” for the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 14)

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a DV cable, be sure to use the optional VC-VDV204U or VC-VDV206U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

“USB” and/or “ ” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a ﬁle to the PC.

NEVER disconnect the USB cable while

“ ” is displayed on the LCD monitor since this can result in product damage.

ADVANCED FEATURES