Connections
Connecting the USB cable
Connect the USB cable to copy still image, video files and voice files in a recording medium to the PC.
PC
To USB connector
Camera*
USB cable
To USB connector
*The camera illustration appearing above is of the
1 To assure safety, make sure all units are turned off before making any connections.
2 Use the USB cable to connect the camera to the PC.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack.
●When the USB cable is connected, turning on or off the camera causes malfunctions of the PC.
●If you connect the camera to the PC through a USB hub, compatibility issues between the hub and the PC may result in instability in the operation of the PC. If this happens, connect the camera directly to the PC, not through the hub.
●Do not use an extension USB cable.
Viewing the Contents of a Recording Medium
1 Make sure that there is a recording medium in the camera.
2 Set the camera's power switch to the playback mode while pressing down the lock button located on the switch.
The camera turns on.
3 Select the playback mode (video mode, still image mode or voice mode).
4 Select the slot in which the recording medium is inserted.
5 Connect the camera to the PC with a USB cable. ( pg. 10)
On the camera’s LCD monitor [USB MODE] appears.
6 When using Windows® XP: The [Removable Disk] window appears on the PC’s screen after a moment.
Select [Open folders to view files using Windows Explorer] and click [OK].
NOTE:
If the [Removable Disk] window does not appear, confirm the connection ( pg. 10) or perform the steps 1 and 2 ( pg. 11).
– 10 – | CONTINUED ON NEXT PAGE |