D-SUB CONNECTOR PIN ASSIGMENTS
PIN ASSIGNMENT
Pin No. | Pin Name | Pin No. | Pin Name |
|
|
|
|
1 | RED VIDEO | 9 | NC |
|
|
|
|
2 | GREEN VIDEO | 10 | GROUND |
|
|
|
|
3 | BLUE VIDEO | 11 | GROUND |
|
|
|
|
4 | NC | 12 | SDA (for DDC) |
|
|
|
|
5 | GROUND | 13 | |
|
|
|
|
6 | RED GROUND | 14 | |
|
|
|
|
7 | GREEN GROUND | 15 | SCL (for DDC) |
|
|
|
|
8 | BLUE GROUND |
|
|
|
|
|
|
TROUBLESHOOTING GUIDE
| Troubleshooting | Troubleshooting Tip | ||
|
|
|
|
|
|
|
| 1. | Make sure if the power supply is connected property. |
| No picture |
| 2. | Turn on the power. |
|
|
| 3. | Select the input signal right for the connected port. |
|
|
|
| |
| The screen is too light or to dark | Adjust the BRIGHTNESS | ||
|
|
|
| |
| The screen size will not fit for the PC input |
| Press the AUTO button among buttons in the front. | |
|
| (It is used only in the PC signal) | ||
|
|
| ||
|
|
|
| |
| Strange colors using the PC input |
| In the FUNCTION menu of the OSD menu, | |
|
| perform | ||
|
|
| ||
|
|
|
|
|
ⓒ 2010 Victor Company of Japan, Limited
- 16 -