E6
2. NAMES AND FUNCTIONS OF PARTS
1 POWER switch................... Turns the main unit power on/off. " | ":ON. "":OFF.
2 POWER Indicator............... Lights up when the POWER switch is turned on. Blinks in case of error during operation.
3 LCD Display Panel............. Shows information using alphanumeric characters.
4 MODE key .......................... Used for LCD display page selection and other operations.
5 SELECT key....................... Used for switching displayed information and other operations.
6 LOAD/EJECT key............... Opens or closes the mail slot.
7ENTER key......................... Used for LCD page selection and other operations.
810-key................................. Used for selecting tray Nos. and changer SCSI ID Nos. for import/export operations.
9 Mail slot.............................. Used for disc insertion/ejection
0 Key cylinder....................... After completing the door opening mode, insert a key and turn it counterclockwise to open
the door.
! Rear panel.......................... Opened and closed when installing or replacing drive units.
@ SCSI connector ................. One SCSI connector port system is provided as standard.
# RS-232C connector........... 9-pin D-sub connector (plug) for use in maintenance.
$ AC inlet (main unit) ........... Insert the provided power cord and plug the other end of the power cord to a 120 V-240 V, 50
Hz/60 Hz AC power outlet.
%Side panel .......................... To be removed in servicing.

2-1. Front panel, right side panel, rear panel

MC-8200LU (MC-8600LU)
Front panel Right side panel Rear panel
9
0
1
POWER MODE SELECT LOAD/EJECT
MAIL SLOT
1 2 3 4 5 6 7 8 9 0 E
348 7
62
5
Control panel : the control panel consist of the keys
2
-
8
and the LCD display screen.
%
!
$
#
@
SCSI-C