JVC MX-GT88 manual Connecting Other Equipment, Canceling the Display Demonstration, English

Connecting Other Equipment

You can connect audio equipment—used only as a playback device.

•DO NOT connect any equipment while the power

is on.

•DO NOT plug in any equipment until all connections are complete.

English

NOW you are ready to plug in the unit and other connected equipment.

Canceling the Display Demonstration

When connecting the AC power cord into a wall outlet, the unit automatically starts the display demonstration.

To connect audio equipment

Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

AUX IN

Audio equipment

To audio output

On the unit ONLY:

To cancel the display demonstration,	CANCEL
press CANCEL/DEMO while the display	/ DEMO

demonstration is shown on the display.

When you press other buttons

The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it.

To start the display demonstration manually

Press and hold CANCEL/DEMO again for
	CANCEL
more than 2 seconds.	/ DEMO

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).

8