JVC MX-J9, MX-J10 manual - page 7

4
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
Connecting the AM Antenna
FM
AM LOOP
FM
75
GND
GND
AM
EXT
ANTENNA
Snap the tabs on the loop
into the slots of the base
to attach the AM Loop.
AM Antenna Wire (not supplied) If reception is poor, connect the outside antenna.
AM Loop Antenna
Turn the loop until you
have the best reception.
ANTENNA
FM
AM LOOP
FM
75
GND
GND
AM
EXT
FM Wire Antenna
Extend the supplied FM Wire Antenna
horizontally.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside antenna),
disconnect the supplied FM Wire Antenna.
ANTENNA
FM
AM LOOP
FM
75
GND
GND
AM
EXT
1
10 mm
34
2
20 mm
If reception is poor, connect the outside antenna.
Outside FM Antenna Wire
Using an FM 75-Ohm Antenna Wire (not supplied)
Note: Even when connecting
an outside AM antenna, keep
the indoor AM loop connected.
EN.01-28.MX-J10/J9[C]/f 99.7.6, 1:35 PM4