5
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
SP-MXJ10 RIGHT
CAUTION:
SPEAKER IMPEDANCE
6 – 16 OHMS.
SPEAKERS
RIGHT LEFT
+
–
+
–
SP-MXJ10 LEFT
Connecting Auxiliary Equipment
Now you can plug the AC power cord into the wall outlet, and your System is
at your command!
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near speakers, the TV may dis-
play irregular colours. In this case, set the speakers away
from the TV.
1 cm (7/16")1 cm (7/16")
Leave a space of at least 1 cm on
both sides of the Unit and at least
15 cm at the back, for ventilation.
Laying out the Unit
POWER
STANDBY
PLAY & EXCHANGER
PHONES
FM/AM TAPE AUX
P.UPP.DOWN
CD
TUNING
UP DECK A/B
DUBBING
REC
START/STOP
CD REC START
REV. MODE
TUNING
DOWN
COMPU
PLAY
CONTROL
1 BIT
DUAL D/A CONVERTER
COMPACT
DIGITAL AUDIO
EJECT EJECT
PLAY REC/PLAY
AUTO REVERSE AUTO REVERSE
SOUND
MODE
VOLUME
REPEAT
RANDOM
CONTINUE
ACTIVE
BASS EX.
VCR or other equipment
To listen to this source, press the AUX button.
LEFTRIGHT
AUX
EN.01-28.MX-J10/J9[C]/f 99.7.6, 1:35 PM5