JVC MX-J500US 8

– 8 –

English

For playing the other equipment through this unit,

connect between the audio output jacks on the other

equipment and AUX jacks by using audio cords (not

supplied).

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your

area with the voltage selector on the rear of the unit.

To audio output

To start the display demonstration manually

Press and hold DEMO for more than 2

seconds.

To stop the demonstration, press any button.

Connecting Other Equipment

You can connect both analog and digital equipment.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect an analog component

Be sure that the plugs of the audio cords are color coded:

White plugs and jacks are for left audio signals, and red ones

for right audio signals.

NOW, you can plug in the unit and other

connected equipment FINALLY!

When connecting the AC power cord into a wall outlet, the

unit automatically starts display demonstration.

• If the wall outlet does not match the AC plug, use the

supplied AC plug ada ptor (except for Argentina).

To stop the display demonstration, press any button on the

unit or on the remote control.

Audio/video

equipment

Use a screwdriver to rotate the voltage selector so the voltage

number the voltage mark is pointing at is the same as the

voltage where you are plugging in the unit. (See the back

cover page.)

• DO NOT plug in before setting the voltage

selector on the rear of the unit and all connection

procedures are complete.

Voltage mark

VOLTAGE

SELECTOR

110V 220V

127V 230V

-240V

EN01-12.MX-J500[U]/f 00.2.17, 6:02 PM8

Contents

Main COMPACT COMPONENT SYSTEM MX-J500 INSTRUCTIONS Page G-2 G-3 IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LSER / IMPOTANTE PARA PRODUTOS LASER / / G-4 CLASS 1 LASER PRODUCT 1 Introduction About This Manual Precautions Installation Power sources Contents 3 Location of the Buttons and Controls Front Panel 4 Front Panel Powered Rolling Panel Display window Display Window 5 Remote Control 6 Getting Started 2 Unpacking Putting the Batteries into the Remote Control 1 7 1 2 Connecting Speakers 1 8 Adjusting the Voltage Selector To start the display demonstration manually Press and hold DEMO for more than 2 seconds. Connecting Other Equipment Common Operations Turning On and Off the Power Setting the Clock Press PANEL OPEN/CLOSE. Press CLOCK/TIMER. 10 Adjusting the Volume To turn down the volume level temporarily Reinforcing the Bass Sound Selecting the Sound Modes 11 Creating Your Own Sound Mode Manual Mode 12 Listening to FM and AM Broadcasts Tuning in a Station Presetting Stations Tuning in a Preset Station 13 Playing Back CDs Loading CDs 1 2 3 Press 0 for the disc tray (CD1 to 3) you want to load a CD onto. Place a disc correctly on the circle of the disc tray, with its label side up. 14 Programming the Playing Order of the Tracks Program Play 15 Repeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Tray Lock To check the program contents To modify the program Playing Back Tapes Pr ess TAPE 22 Playing Back a Tape Press EJECT (0) for the deck you want to use. Put a cassette in, with the exposed part of the tape down. Recording Recording a Tape on Deck B Press EJECT 0 for the deck B. Put in a recordable cassette, with the exposed part of the tape down. Close the cassette holder gently. 18 CD Direct Recording Put a recordable cassette into deck B. Place a disc correctly on the circle of the disc tray, with its label side up. Press one of the disc number buttons (CD1 to CD3) to select the disc, then 7. 19 Auto Edit Recording 20 Using the Microphones Singing Along 21 Using the Timers Using Daily Timer How Daily Timer actually works Press CLOCK/TIMER until DAILY appears on the display. Press CLOCK/TIMER again. 22 When selecting CD When selecting TUNER FM or TUNER AM Press 4 or to set the volume level. Press SET to complete the Daily Timer setting. 23 Using Sleep Timer How Sleep Timer actually works On the remote control ONLY: Press SLEEP. Maintenance Handling cassette tapes Handling discs 25 Troubleshooting 26 Specifications Amplifier section CA-MXJ500 Tuner CD player Cassette deck V