JVC NX-PN10 Listening to FM Broadcasts, Basic Operations

Listening to FM Broadcasts

Basic Operations

Buttons
On the unit	Operations
	On the remote
	Selects FM as the source.
	FM
	AUDIO IN
	When an FM program is broadcasted in stereo, ST (stereo)
	lights up on the display (only when the reception is good).
	Press: Changes the frequency.
	Hold down and release: The unit starts searching for stations
	and stops when a station of sufficient signal strength is found.
	• To stop searching, press again.
	Tunes in to a preset station: Press repeatedly to select a preset
—	station number. (For presetting stations, see page 18.)
	Changes the FM reception mode: When an FM stereo
	broadcast is hard to receive or noisy, press to improve
—	reception. MONO (monaural) lights up on the display.
	Reception will improve though the stereo effect is lost.
	• To restore the stereo effect, press again.

AM band is not received with this unit.

17