JVC NX-PS1 manual (Twice)

Setting the Clock and Daily Timer

Setting the Clock

1	Activate the clock setting mode (“Clock Adjust” appears).
	The hour digit of the time indication blinks on the display.

•If you have already adjusted the clock before, press the button repeatedly until “Clock Adjust” appears.

				Current timer settings			Timer setting	Clock Adjust
						Canceled
		If the clock has not been adjusted, “Clock Adjust” appears first.
2	or	1	Adjust the hour.		The minute digits of the time indication blink
		2	Adjust the minute.		on the display.
					The built-in clock starts working.

•To go back to the previous step, press CANCEL.

•If there is a power failure, the clock loses the setting and is reset to “AM12:00”. You need to set the clock again.

Setting the Daily Timer

Without setting the built-in clock, you cannot use Daily Timer. Using Daily Timer, you can wake up with music, etc.

Connect the iPod or USB mass storage device, or other equipment, to the Unit beforehand. (P.13, P.15, P.19)

1	(Twice)	Select the timer setting mode.
				Current timer settings			Timer setting
					Canceled	Clock Adjust
		1	Adjust the hour then the minute for Daily Timer on-time.
		2	Adjust the hour then the minute for Daily Timer off-time.
			• The on-time and off-time of the Daily Timer cannot be set to the same time.
		3	Select the playback source—“iPod,” “USB MEMORY,” or “AUX.”
2	or		• If “USB MEMORY” is selected, select the GROUP number (“001” to
				“500” and “---”) and then select the TRACK number (“001” to “999”
				and “---”).
				If you select “---,” TRACK1 in GROUP1 is set.
		4	Select the volume level (“VOLUME MIN / 1 to 29 / VOLUME MAX”).

“SET OK” appears briefly followed by setting information, then the icon appears on the display.

3 Turn off the System (on standby).

•To exit from the timer setting, press CLOCK/TIMER as required.

•To correct a misentry during the process, press CANCEL. You can return to the previous step.

11