Quick Setup

Plug-In Menu

 

 

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.

AUTO TUNER SETUP

 

TUNER MODE

CABLE

 

 

START

 

 

 

 

 

 

SELECT OPERATE

MENU EXIT

è To choose CABLE or AIR (or SKIP when you skip Auto Tuner Setup)

To START

NOW

PROGRAMMING !

48

Programming will take approximately 1 to 2

minutes.

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

Noise muting will not work during Auto Tuner Setup.

Skip appears only for interactive plug-in menu.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.

STOP The Quick Setup is complete

25