If a VCR is connected to the VIDEO-1 terminal:

Set the VCR’s remote control code to A code.

If a DVD player is connected to the VIDEO-1 terminal:

Set the DVD player’s AV COMPULINK MODE to DVD2.

If a VCR is connected to the VIDEO-2 terminal:

Set the VCR’s remote control code to B code.

If a DVD player is connected to the VIDEO-2 terminal:

Set the DVD player’s AV COMPULINK MODE to DVD3.

If a DVD player is connected to the VIDEO-3 terminal with a component video cable:

Set the DVD player’s AV COMPULINK MODE to DVD1.

•For instructions on how to change the device’s setting, refer to the device’s instruction manual.

•If the device you are connecting has neither the remote control code nor the AV COMPULINK MODE, then connect it to the TV’s VIDEO-1 terminal.

Additional preparation

ENGLISH

45