CASSETTE PLAYBACK

Notes on cassette tapes

•Use only type-I normal tapes. The recording/playback characteristics of this unit are those for normal tapes, which have different characteristics from CrO2 and metal tapes.

•The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch roller and the capstan.

•Loose tape may cause trouble. Gently tighten the tape with a pencil as shown in the figure below.

Turn the pencil to take up the slack.

•To prevent recordings from being accidentally erased, remove the tab(s) with a screwdriver. After the tabs have been broken off, reseal the slots with adhesive tape to erase or re-record.

Loading a cassette1 Press STOP/EJECT § to open the cassette holder.

2 Load a cassette with the open side up and the playback side facing out as shown in the figure below.

+Forward direction

CD

PLAY/PAUSE

 

TUNER

DISPLAY

BAND

 

3Close the cassette holder by pressing it gently and firmly.

The cassette holder clicks back into position.

English

14