JVC RD-T7GN, RD-T5BU Using the Tuner, Tuning In a Station, Setting the AM Tuner Interval Spacing

English

■Using the Tuner

Number keys

TUNER BAND

4

SNOOZE

/DIMMER SLEEP STANDBY/ON

1 2 3

4 5 6

7 8 9

10+10 REPEAT

TUNERCD

BAND

FM MODE

BASS/TREBLE AHB PRO

CLOCK/DISPLAY

¢

				MULTIJOG
				VOLUME
		CD PORTABLE SYSTEM
STANDBY/ON	CLOCK/		RANDOM/	BASS/
	DISPLAY	SLEEP
		AHB PRO	REPEAT	TREBLE
	STANDBY
	TIMER
	CD/TUNER	ALARM
				P.TUNING
SNOOZE/DIMMER			CD	TUNER BAND

■P.TUNING

¢

4

TUNER BAND

Band display, Frequency display, Preset channel

VOLUME

REMOTE CONTROL RM-SRDT7

[RD-T7GN Only]

You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.

Setting the AM Tuner Interval Spacing ——————————————

When shipped, the AM tuner interval is set to 9 kHz spacing. You can change it to 10 kHz spacing.

To select 10 kHz intervals, while holding down the ¢ button on the Unit in Standby mode, press the %button on the Unit to turn on the power (at the same time, the 100 kHz spacing is selected for FM broadcast).

To select 9 kHz intervals again, while holding down the 4 button on the Unit in Standby mode, press the %button on the Unit to turn on the power.

[10 kHz Intervals]	[9 kHz Intervals]
STANDBY/ON	STANDBY/ON
STANDBY	STANDBY

Note: When you change the setting, the preset stations are erased. You will need to preset the stations again. (See page 6.)

One Touch Radio (AC power only)—

Just press the TUNER BAND button to turn on the Unit and start playing the station you were last tuned to.

■You can also switch from the CD Player to the radio by pressing the TUNER BAND button.

Tuning In a Station

■1. Press the TUNER BAND button.

The Band and Frequency you were last tuned to appear on the display.

Each time you press the button, the band changes as follows:

(Display when using the Tuner)

■2. Select a station using one of the following methods.

■Manual Tuning

Press the 4 or ¢ button repeatedly to move from frequency to frequency until you find the station you want.

P.TUNING

or

OR

■Auto Tuning

If you press and hold the 4 or ¢ button for one second or

more, the frequency changes down, or up, automatically until a station is found.

OR

■Preset Tuning using the Unit (Possible only after pre- setting stations)

Press the 7 P.TUNING button to select the preset station. After you have selected the preset number, the band and the fre- quency are displayed.

•Example:Press the 7 P.TUNING button until the preset number 12 “P- 12” appears.

OR

■Preset Tuning using the Remote Control (Possible only after presetting stations)

Select the station by entering its preset number on the number keys.

•Example:For channel 5, press 5. For channel 15, press +10 then 5. For channel 25, press +10 twice, then 5. For channel 30, press +10 twice, then 10.

•The band and the frequency are displayed.

FM AUTO	FM MONO	AM	3. Turn the antenna for best reception.
			■
			• For FM broadcast, extend the built-in wire antenna.
			• For AM broadcast, turn the Unit itself.
				For FM	For AM

5