JVC RM-P2580 - page 6

8[AUTO] button

When this button is pressed, the unit enters the AUTO SE-

QUENCE mode, in which the indicator lights up and the

MONITOR OUTPUT 1 connector ‚ on the rear panel out-

put the camera video signals according to automatic switch-

ing.

REF. : “AUTO SEQUENCE OPERATION” on page 13.

9[F1, F2, F3] Function buttons

These buttons are valid only when SW-D7000/SW-D8000

frame switchers are being used.

When this unit is operated in the B mode, these buttons

can control certain functions of the specific frame switcher

model connected to this unit. The RS-232C control is in-

volved in this control operation.

For details, please consult your dealer or JVC-authorized

service agent.

REF. : “APPLIED SYSTEM (B MODE)” on page 22.

F1: Single-screen select switch

Press this button to output a single-screen video from

the frame switcher.

The camera number can be selected using the numeric

keypad, etc.

F2: Split-screen select switch

Press this button to output a split-screen video from

the frame switcher.

F3: LIVE/PLAY switch

Press this button to switch between the playback video

of a time-lapse VCR and the camera video.

0[CAMERA] button

Press when selecting a camera.

To select a camera, use the following buttons:

CAMERA button 0 → Numeric key buttons * →

ENTER button &.

REF. : “CAMERA SELECTION” on page 10.

![POSITION] button

Press when selecting one of the position numbers preset

for the camera.

To select a position, use the following buttons:

POSITION button ! → Numeric key buttons * → EN-

TER button &.

REF. : “POSITION SELECTION” on page 11.

@[OPTION 1, 2]

These buttons are not used for the present. Do not touch

them.

#[PAN/TILT] control lever

Operate the lever to pan (swing horizontally) or tilt (swing

vertically) the rotary turret of a camera.

8(Up) :Tilt the lever in this direction to tilt the rotary

turret upward.

9(Down): Tilt the lever in this direction to tilt the rotary

turret downward.

;(Right) :Tilt the lever in this direction to pan the rotary

turret toward the right.

:(Left) :Tilt the lever in this direction to pan the rotary

turret toward the left.

REF. : “MANUAL OPERATION” on page 12.

While a menu screen is displayed, this lever is used to

select or to set an item.

REF. : “MENU OPERATION METHOD” on page 26.

1. INTRODUCTION

CONTROLS, CONNECTORS AND INDICATORS (Continued)

SETUPSETUP

MENUMENU SETSET

SPEEDSPEED

IRISIRIS

AFAF

FOCUSFOCUS

ZOOMZOOM

OPENOPEN

FARFAR

TELETELE CLEARCLEAR /HOME/HOME

ENTERENTER

AUTOAUTO

PANPAN

OPTIONOPTION

1OPTIONOPTION

CAMERACAMERA

POSI-POSI-

TIONTION

AUTOAUTO

PATROLPATROL

CLOSECLOSE

NEARNEAR

WIDEWIDE

AUTOAUTO F-1F-1 F-2F-2 F-3F-3

PAN/TILTPAN/TILTLENSLENS

CAMERA/POSITION

CAMERACAMERA POSITIONPOSITION

REMOTE CONTROL UNIT REMOTE CONTROL UNIT

RM-P2580RM-P2580

ALARMALARM

POPOWERWER

KEY LOCKKEY LOCK

*&(

¤

⁄

)

‹

$^ %