22
LVT0703-002A / RV-DP200BK (B) / English
■■Using the Microphone/Guitar
Using a microphone (not supplied), you can mix the microphone
sound with a source sound.
■
1. Set the MIC LEVEL control to MIN by turn-
ing it fully counterclockwise.
■
2. Open the rubber cap and connect a micro-
phone into the MIC jack on the Unit.
■
3. Start a source: CD, tape, tuner, Rhythm
Machine, or other equipment.
■
4. Adjust the main volume and the MIC LEVEL
control, as you sing into the microphone.
■
1. Follow the above steps 1-4.
■
2. To record, follow the steps in "Standard
Recording". (See page 14.)
Note: If "howling" occurs, keep the microphone away from the
Unit.
Using a guitar, you can mix the guitar sound with a source sound.
CAUTION: DO NOT connect a bass guitar to
the GUITAR jack, as it may damage the Sys-
tem.
■
1. Set the GUITAR LEVEL control to MIN by
turning it fully counterclockwise.
■
2. Open the rubber cap and connect a guitar
into the GUITAR jack on the Unit.
■
3. Start a source: CD, tape, tuner, Rhythm
Machine, or other equipment.
■
4. Adjust the main volume and the GUITAR
LEVEL control, as you play the guitar.
■
1. Follow the above steps 1-4.
■
2. To record, follow the steps in "Standard
Recording". (See page 14.)
MIXING
PALETTE
PALETTE
PAD
DRUM
MIC
PAD
MODE
MIN
GUITAR
MAX MIN MAX
MIC LEVEL
GUITAR LEVEL
GUITAR Jack (Use a 6.3 mm diameter plug)
MIC jack (Use a 6.3 mm diameter plug)
Microphone Mixing
To Record Microphone Mixing
on a Tape
Guitar Mixing
To Record Guitar Mixing on a
Tape
RD-DP200(B)-Eng.fm Page 22 Friday, February 2, 2001 1:27 PM