23
LVT0703-002A / RV-DP200BK (B) / English
■■Using the Timers
The timers let you control listening and recording functions auto-
matically.
When you supply the power using one of the following ways, the
"CLOCK" indicator blinks and "0:00" appears on the display. You
need to set the clock.
• Plugging the AC power cord into the wall outlet
• Loading 10 batteries into the Unit
• Connecting car battery (DC12V)
Use the Remote Control to set the clock.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within two minutes. Oth-
erwise, the setting is cleared and must be repeated from the
beginning.
■
1. Turn on the System.
■
2. Press the CLOCK button on the Remote
Control.
The time indication blinks on the display.
■
3. Press the UP or DOWN button to set the
time.
Press the UP or DOWN button to increase or decrease the time.
Pressing and holding the button will change the time rapidly.
■
4. Press the SET button.
The selected time is set and the seconds start counting from 0.
Then, the display returns to the original one.
CAUTION: If memory backup batteries are ex-
hausted or not installed, and the AC power cord is
plugged in again after being disconnected, or
power is restored after a power failure, "CLOCK"
indicator will blink on the display. Set the current
time (clock) again.
Once you have set the Daily Timer, the timer will be activated at the
same time every day, except for the Tuner REC timer which is used
to record a broadcast on the tape. It can be cancelled and reactivated
whenever you wish.
The Timer indicator ( ) on the display shows when the Daily
Timer you have set is in effect.
Use the Remote Control to set the Daily Timer.
Note: Perform each setting within 30 seconds. Otherwise, set-
ting is cleared and the procedure must be repeated from the
beginning.
■
1. Turn on the System.
■
2. Setting the ON time (Example: 12:15).
1. Press the TIMER button on the Remote Control.
The Timer indicator ( ) and "ON" indicator light up and
the current ON time blinks on the display.
2. Set the ON time by pressing the UP or DOWN button.
Pressing and holding the button will change the time rapidly.
3. Press the SET button.
The current OFF time blinks on the display.
CLOCK
DOWN
UP SET
TIMER TIMER
ON/OFF
SLEEP
PROGRAM
RANDOM
REPEAT
DISPLAY
VOLUME
SUPER WOOFER
VOLUME
RM-SRVDP100E
REMOTE CONTROL
AUX CD TAPE
BAND
FM MODE
TUNER
AUTO
PRESET
REVERSE MODE
REW
MULTI CONTROL
FF
MID /
TREBLE
SLEEP
TIMER REC
indicator
TIMER ON/OFF
CLOCK indicator
ON time, OFF time, Source, Volume
When the System is in use, the displa y shows other items as well.
For simplicity, we show here only the items described in this section.
CLOCK
DOWN
UP
SET
■
ON time/OFF time indicator
TIMER
indicator
TIMER
SLEEP indicator
Setting the Clock
CLOCK
DOWN
UP SET
or
Setting the Daily Timer
RD-DP200(B)-Eng.fm Page 23 Friday, February 2, 2001 1:27 PM