JVC RX-558RBK manual Specifications, English, Amplifier

English

Specifications

Amplifier

Output Power

At Stereo operation: 55 watts per channel, min. RMS, both channels driven into 4 ohms at 1kHz, with no more than 0.9 % total harmonic distortion. (IEC268-3/DIN)

At Surround operation:

Front Channel:	50 watts per channel, min. RMS, driven into
	4 ohms at 1 kHz, with no more than 0.8 %
	total harmonic distortion.
Center channel:	50 watts, min. RMS, driven into 4 ohms at 1
	kHz, with no more than 0.8 % total
	harmonic distortion.
Rear channel:	50 watts per channel, min. RMS, driven into
	4 ohms at 1 kHz, with no more than 0.8 %
	total harmonic distortion.

Total Harmonic Distortion (4 ohms, 1 kHz): 0.8 %* at 55 watts output

(* Measured by JVC Audio Analysis System)

Audio Input Sensitivity/Impedance (1 kHz): PHONO (MM): 1.5 mV/47 k ohms CD, TAPE/MD, VCR, DVD:

120 mV/47 k ohms

Audio Output Level: TAPE/MD, VCR 120 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

PHONO:70 dB/66 dB CD, TAPE/MD, VCR, DVD:

87 dB/67 dB

Frequency Response (8 ohms):

PHONO:20 Hz to 20 kHz (±1 dB) CD, TAPE/MD, VCR, DVD:

20 Hz to 20 kHz (±1 dB)

RIAA Phono Equalization: ±1.0 dB (20 Hz to 20 kHz)

27