External
output component
| Decoder |
|
A B C | (or DVD player) | D E |
|
|
|
|
|
|
| AUDIO |
R | LEFT |
FRONT |
|
L |
|
| CENTER |
SUB |
|
WOOFER | L |
| |
SURR | R |
R | |
SURR |
|
BACK | L |
L | EXT 7.1CH IN |
ÅTo left/right front channel output
ı To LFE channel (subwoofer) output
Ç To left/right surround back channel output Î To left/right surround channel output
‰ To center channel output
Note:
The ZIST circuit (see page 1) is incorporated for the EXT 7.1CH IN jacks to clarify the audio signals independently from the video input circuit. However, if the external component connected to the EXT 7.1CH IN jacks and this receiver are not connected using video cords (composite, S- video, or component), noise may happen to be generated when listening to this external component.
In this case, connect the video output jacks on the external component and unused video input jacks on this receiver.
How to view the pictures through an external component connected to the EXT 7.1CH IN (audio input) jacks
The EXT 7.1CH IN jacks do not have any corresponding video input jack on the rear. You have to use one of the following methods to view the pictures through the external component.
•Connect the video output jack on the external component directly to the TV, and select the connected input on the TV.
•Connect the video output jack on the external component to any one of unused video input jacks on the rear, then...
1.Select that video input as the video source.
2.Select “EXT 7.1CH” as the audio source.
(See “Selecting different sources for picture and sound” on page 24).
Video component connections
Use cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.
•If your video components have
IMPORTANT:
This receiver is equipped with the following video
However, observe the following points when make connections:
•Composite video signals and
—Pictures may be distorted if the signals are converted. If this happens, connect the playback source component and TV using the cords of the same type.
•When the recording components and this unit are connected using the video cords or
•Component signals cannot be converted. So incoming signals of this type can be emitted only through the component output jacks.
Video Input |
| Converted |
| Video Output | |||
|
|
|
|
|
|
|
|
Component |
|
|
|
|
|
| Component |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Video (composite) |
|
|
|
|
|
| Video (composite) |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Notice: Pictures through the video components only connected to the component input jacks on the rear of this unit cannot be viewed in Zone 2.
Video camera
The VIDEO input terminals on the front panel are convenient when connecting and disconnecting the component frequently.
•When you do not use the VIDEO input terminals, attach the front terminal cover (supplied) to these jacks to protect them from dust.
• When attaching the front |
|
|
terminal cover | DIGITAL | VIDEO |
|
| VIDEO |
•When removing the cover
To audio output
To composite video output
| To |
L R | To optical digital output |
|
DIGITAL
VIDEO
Video camera
When using the digital input terminal
Select the digital input mode correctly.
For details, see “Selecting the Analog or Digital Input Mode” on page 25.
English
12