About the FRONT 2/ZONE 2 SPEAKERS terminals
The FRONT 2/ZONE 2 SPEAKERS terminals can be used as follows:
•To connect the second pair of the front speakers in Zone 1.
•To connect the front speakers in Zone 2 when using the multi- room operations (see page 19).
•To connect the front speakers in Zone 1 and to drive them using two amplifiers built in this receiver.
If the speakers connected are of the
Left Front speaker | Rear view | Right Front speaker | ||||
|
|
|
|
| ||
|
|
| HIGH |
| HIGH |
|
|
|
| LOW |
| LOW |
|
|
| FRONT 1 SPEAKERS | FRONT 2 / | CENTER | ||
|
| ZONE 2 SPEAKERS | SPEAKER | |||
CAUTION : | + |
|
|
|
| |
SPEAKER |
|
|
|
|
| |
IMPEDANCE |
|
|
|
|
| |
FRONT 1 AND 2 |
|
|
|
|
| |
/ ZONE 2: |
|
|
|
|
| |
8 | 16 | – |
|
|
|
|
FRONT 1 OR 2: |
|
|
|
| ||
4 | 16 |
| LEFT |
| LEFT |
|
|
| RIGHT | RIGHT |
|
To use the speaker with the above connection, see “w Setting the Zone 2/Speakers 2
43 and 44.
•When this connection is used, you cannot use the surround back speakers. (In this case, no sounds come out of the SURR BACK PREOUT jacks.)
Connecting a subwoofer
You can enhance the bass by connecting a subwoofer. Connect the input jack of a powered subwoofer to the SUBWOOFER PREOUT jack on the rear panel, using a cable with RCA pin plugs (not supplied).
Rear view
| FRONT |
|
| SUB |
|
|
| CENTER |
| SURR |
|
| SURR |
|
| BACK |
|
Powered | R | L |
subwoofer |
| PREOUT |
|
|
Enhance your audio system
You can use this receiver as the
•Connect the white plug to the audio left jack, and the red plug to the audio right jack.
Rear view
Left front speaker | Right front speaker |
Power amplifier
Center speaker
R L
Power amplifier
RL
FRONT
SUB
WOOFER
CENTER
R
SURR
L
SURR
BACK
L | R | PREOUT |
R L
Power amplifier
RL
Power amplifier
Left surround | Right surround |
speaker | speaker |
Left | / Right |
surround back speakers
English
10