English
Activating the Zone 1 Front Speakers
When shipped from the factory, both pairs of the front speakers have been set to be used in Zone 1.
•To connect the speakers to the FRONT 2/ZONE 2 SPEAKERS terminals, set the speaker usage correctly. (See “w Setting the Zone 2/Speakers 2
On the unit ONLY:
When you have connected two pairs of front speakers and placed them in Zone 1, you can select which to use.
To use the speakers connected to the FRONT SPEAKERS 1 1 SPEAKERS terminals, press SPEAKERS 1
(inside the front door) so that the speakers 1 SPEAKERS 2
/ ZONE 2
indicator lights up on the display. (Make sure
that the speakers 2 indicator is not lit on the display.)
To use the speakers connected to the FRONT 2/ZONE 2
SPEAKERS terminals, press SPEAKERS 2 (inside the front door) so that the speakers 2 indicator lights up on the display. (Make sure that the speakers 1 indicator is not lit on the display.)
To use both sets of the speakers, press SPEAKERS 1 and SPEAKERS 2 so that the speakers 1 and 2 indicators light up on the display.
To use neither set of the speakers, press SPEAKERS 1 and SPEAKERS 2 so that the speakers 1 and 2 indicators disappear from the display.
(“HEADPHONE” appears on the unit’s display.)
Notes:
•Even if both pairs of the front speakers are activated, the speakers connected to the FRONT 2/ZONE 2 SPEAKERS terminals are deactivated in the following cases:
–If you select “DVD MULTI” or “EXT 7.1CH” as the source, or
–If you select one of the Surround/THX/DSP modes.
•The SPEAKERS 2 button will not work if “SPEAKER 2” is set to “BI- AMP OUT” (see page 44).
Listening with headphones only:
Sounds through the front speakers and the subwoofer shut off when connecting a pair of headphones to the PHONES jack. (“HEADPHONE” appears on the unit’s display.)
You can enjoy the following sound effects through the headphones:
Selecting the Analog or Digital Input
Mode
When you have connected digital source components using the digital terminals (see pages 12 and 16), you need to select the digital input mode.
Before you start, remember...
•The digital input (DIGITAL IN) terminal setting should be properly done (see “9 Setting the Digital Input/Output
•The digital input can be used for the Zone 1 sources. The analog input is always selected as the Zone 2 source without respect to this setting.
1.Press one of the source selecting buttons (DVD, VCR 1, TV/DBS, VIDEO, CD, CDR, or TAPE/ MD*) for which you want to change the input
mode.
DVD DVD MULTI VCR 1 | VCR 2 | TV/DBS | VIDEO | CD | PHONO TAPE/MD | CDR | FM/AM EXT 7.1CH |
On the unit
DVD | DVD MULTI | PHONO | CD |
VCR 1 | VCR 2 | TAPE/MD | CDR |
TV/DBS | VIDEO | FM/AM | EXT 7.1CH |
From the remote control
Note:
*If “TAPE” has been assigned to the TAPE/MD button, it does not work in this step.
To change the source name, see “Changing the Source Name” on page 27.
2.Press INPUT MODE (or ANALOG/DIGITAL INPUT) to change the input mode.
•Each time you press the button, the input mode changes as follows:
•If the Surround/THX mode is activated, you can enjoy surround effect. (For details, see “3D HEADPHONE Mode” on page 57.)
•If a DSP mode is activated, you can enjoy the DSP effect. (For details, see “HEADPHONE Mode” on page 58.)
INPUT MODE
/ INPUT ATT
On the unit
ANALOG/DIGITAL
INPUT
From the remote control
CAUTION:
Be sure to turn down the volume before connecting or putting on
headphones, as high volume can damage both the headphones and
your hearing.
(inside the front door)
| ANALOG | SPEAKERS | 1 | |
L | R | |||
|
| |||
SUBWFR |
| VOLUME | ||
dB
|
|
| DGTL AUTO |
|
L | C | R | SPEAKERS | 1 |
SUBWFR | LFE | DIGITAL | VOLUME | |
LS |
| RS |
|
|
dB
Ex. When the source is “DVD.”
25