To use the stored signals
When you want to use the stored signals, follow the procedure below.
IMPORTANT:
To operate the other component(s) using this remote control—
•Aim directly at the remote sensor(s) on the target component(s).
–This remote control can send signals at a distance of 7 m (23 feet).
OR
•You can also use the IR signal transmitter connected to this receiver.
–Place the IR signal transmitter so that it is aimed at the remote sensor(s) on the target component(s).
You can operate the other component(s) through the remote sensor on this receiver.
When using the remote control:
–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” properly.
1.Set the LEARN/TRANSMIT (ZONE 1/ZONE 2) selector to “TRANSMIT (ZONE 1/ZONE 2).”
LEARN TRANSMIT | LEARN TRANSMIT | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ZONE 1 |
| ZONE 2 | ZONE 1 |
| ZONE 2 | ||||||
For the Zone 1 operations | For the Zone 2 operations | ||||||||||
2.Press one of the source selecting buttons (or CONTROL repeatedly) to select the desired remote control operation mode (source).
DVD | DVD MULTI | PHONO | CD |
VCR 1 | VCR 2 | TAPE/MD | CDR |
TV/DBS | VIDEO | FM/AM | EXT 7.1CH |
3. Press the desired button.
TV/CATV/DBS | VCR 1 | / REW | PLAY | FF/ |
STANDBY/ON | STANDBY/ON | DOWN | TUNING | UP |
|
|
| ||
|
| REC | STOP | PAUSE |
TV/VIDEO
|
| EFFECT | TV VOL CHANNEL |
1 | 2 | 3 |
|
|
| LIVENESS |
|
4 | 5 | 6 |
|
7/P | 8 | 9 |
|
|
|
| SET |
10 | 0 | +10 |
|
RETURN | FM MODE | 100+ | DVD |
|
|
| MENU |
Notes:
•To operate the TV, CATV tuner, or DBS tuner, set the TV operation mode selector correctly.
•To use the following buttons, you can skip step 2 above.
–TV/CATV/DBS 
(STANDBY/ON), VCR 1 
(STANDBY/ ON), TV VOL
•To use the following buttons, press DVD MENU first.
–SET, % / fi / @ / #
To erase the stored signals
After erasing the stored signals, preset signals are resumed and you can operate JVC’s components again.
1. Set the LEARN/TRANSMIT (ZONE 1/ LEARN TRANSMIT
ZONE 2) selector to “LEARN.”
ZONE 1 ZONE 2
2.Press and hold EXIT, then press one of the source selecting buttons from which you want to erase the stored signals.
|
| DVD | DVD MULTI | PHONO | CD |
EXIT | and | VCR 1 | VCR 2 | TAPE/MD | CDR |
| |||||
|
|
|
|
| |
|
| TV/DBS | VIDEO | FM/AM | EXT 7.1CH |
LEARN
“CLEAR” appears on the display, and all the signals stored in the selected remote mode (source) are erased at the same time.
Notes:
•You cannot erase a signal assigned to a particular button only. Storing a new signal to a particular button erases the previously stored signal.
•To erase the stored signals for “CD DISC,” first press CONTROL to select “CD DISC,” then press CONTROL again while holding EXIT this time.
EXIT
\ and
3.Set the LEARN/TRANSMIT (ZONE 1/ZONE 2) selector to “TRANSMIT (ZONE 1/ZONE 2)” to finish the erasing procedure.
LEARN | TRANSMIT | LEARN | TRANSMIT | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ZONE 1 |
| ZONE 2 | ZONE 1 |
| ZONE 2 | ||||||
|
|
|
|
|
|
| |||||
For the Zone 1 operations | For the Zone 2 operations | ||||||||||
English
80