ENGLISH
Category | Menu items | Selectable settings, [reference page] | |||
|
| VOL ADJUST | VOL ADJ | : Preset the volume adjustment level of each source (except | |
|
| Volume adjust | — | FM), compared to the FM volume level. The volume level | |
|
|
| VOL ADJ +05 | will automatically increase or decrease when you change the | |
|
|
| (Initial: VOL | source. | |
|
|
| ADJ 00) | • Before making an adjustment, select the source you want to | |
|
|
|
|
| adjust. |
|
|
|
|
| • “VOL ADJ FIX” appears on the display if “FM” is selected as |
|
|
|
|
| the source. |
|
| L/O MODE | • | SUB.W | : Select if the REAR LINE OUT terminals are used for connecting |
|
| Line output |
|
| a subwoofer (through an external amplifier). |
| AUDIO | mode | • | REAR | : Select if the REAR LINE OUT terminals are used for connecting |
|
|
|
| the speakers (through an external amplifier). | |
|
|
|
|
| |
|
| SUB.W FREQ*6 | • | LOW | : Frequencies lower than 72 Hz are sent to the subwoofer. |
|
| Subwoofer | • | MID | : Frequencies lower than 111 Hz are sent to the subwoofer. |
|
| cutoff frequency | • | HIGH | : Frequencies lower than 157 Hz are sent to the subwoofer. |
|
| SUB.W LEVEL*6 | SUB.W 00 | : Adjust the subwoofer output level. | |
|
| Subwoofer level | — SUB.W 08 | (Initial: SUB.W 04) | |
|
| BEEP | • | BEEP OFF | : Deactivates the key touch tone. |
|
| Key touch tone | • | BEEP ON | : Activates the key touch tone. |
|
| AMP GAIN*7 | • | LOW POWER | : VOLUME 00 – VOLUME 30 (Select if the maximum power |
|
| Amplifier gain |
|
| of each speaker is less than 50 W to prevent damaging the |
|
| control |
|
| speaker.) |
|
|
| • | HIGH POWER | : VOLUME 00 – VOLUME 50 |
| SELECT | AM*8 | • | AM OFF | : Disable “AM” in source selection. |
| AM station | • | AM ON | : Enable “AM” in source selection, [4]. | |
|
| ||||
| SRC | AUX IN*9 | • | AUX OFF | : Disable “AUX IN” in source selection. |
| Auxiliary input | • | AUX ON | : Enable “AUX IN” in source selection, [4]. | |
|
| ||||
*6 | Displayed only when “L/O MODE” is set to “SUB.W.” | ||||
*7 | The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level | ||||
| set higher than “VOLUME 30.” |
|
| ||
*8 | Displayed only when any source other than “AM” is selected. | ||||
*9 | Displayed only when any source other than “AUX IN” is selected. |
16