ENGLISH

Additional Information

Speaker layout

To obtain the best possible sound from your unit:

—Place a subwoofer wherever you like since bass sound is non- directional. Normally place it in front of you.

—Place all the main speakers at the same distance from the listening position.

Be sure to place the powered subwoofer to the TV's right. If you place the powered subwoofer to the TV's left, keep sufficient distance between them to prevent the TV from appearing mottled.

 

Center speaker

Front left

Front right

speaker

speaker

Powered subwoofer

Surround left

Surround right

speaker

speaker

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer.

Power does not come on.Is the unit pugged in?– Plug the AC power cord firmly into the AC outlet.Auto Power On/Standby does not function correctly.Signals are too weak or volume level is too low.– This is not a malfunction. If this happens, cancel Auto Power On/Standby.No sound is heard.Connections are incorrect, or loose.Check the connections. If incorrect, redo the connections. (See pages 4.)Audio signals through the amplifier are extremely weak.Increase the volume level on the amplifier.Sounds fluctuate (suddenly become loud or soft).The built-in protective circuit is working.– Lower the volume level, then turn off and on the unit.Suddenly no sound comes out. – the power lamp still lights in green.The volume of the playback source is too high.

– Turn down the volume of the playback source, turn off and on the source, then adjust the volume properly on the source.

Specifications

Type : Powered Subwoofer Bass-reflex type (magnetically shielded type)Speaker : 16.0 cm cone 1Frequency Range : 32 Hz 200 HzImpedance : 4 Input terminals : INPUT (LOW-LEVEL)Power requirements : AC 230 V, 50 HzOutput power of built-in amp : 100 W (50 Hz, 4 , 10 % THD)Power Handling Capacity : 27 WDimensions(W H D) : 184 mm 374 mm 354 mm Mass : 8.2 kgAccessories : Monaural audio cord (1)

– 5 –