English

Using the Timers

Using the Unit

8 Press theSTANDBY/ON button to turn

You can set the time in the same way as for setting the Daily Timer.

off the System, if necessary.

1

Insert a blank or erasable tape into the Deck

The Timer indicator ( ) and “REC” indicator are lit on the

 

B and wind past the tape leader.

display, showing that the REC Timer is set to on.

2

Press the CLOCK TIMER button until “ON TIME”

To confirm / change the timer setting, repeat the setting pro-

cedure from the beginning.

 

 

immediately after “REC” appears on the display.

Each time you press the button, the display changes as follows: DAILY =ON TIME =REC =ON TIME* =Clock setting display =Canceled =(back to the beginning)

*: This item should be selected for the REC Timer setting.

Then, the System enters ON-time setting mode. The current ON time appears on the display and the hour digits, “REC” indicator blinks and the Timer indicator () lights up.

When the timer ON-time comes:

•When the timer ON-time comes, the System automatically turns on. The station you have set is played. The “REC” indica-

tor lights up and the Timer indicator ( ) and the Tape Indica- tor (3) blinks during timer operation.

To stop timer recording, press the 7button.

•When the timer OFF-time comes, the System automatically turns off.

•If the System is already on when the timer ON-time comes, the REC Timer does not work.

Turning the REC (Recording) Timer On and Off

Once you have set the REC Timer to record a source, the timer setting is stored in memory. So, though the REC Timer turns off once it is used, you can recall it at any time.

3 Setting the ON time you want the System to turn on.

1.Press the 4 or ¢ button to set the hour, then press the SET/DISPLAY button.

2.Press the 4or ¢button to set the minute, then press the SET/DISPLAY button.

“OFF TIME” appears and then the System enters OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink.

4 Setting the OFF time you want the System to turn off.

1.Press the 4 or ¢ button to set the hour, then press the SET/DISPLAY button.

2.Press the 4or ¢button to set the minute, then press the

SET/DISPLAY button.

The System enters Preset Station Entering mode.

5 Select the preset station for recording.

1.Press the 4or ¢button to set the band (TUNER FM or TUNER AM), then press the SET/DISPLAY button.

2.Press the 4 or ¢ button to set the preset number, then press the SET/DISPLAY button.

To cancel the REC Timer temporarily:

1 Press the CLOCK TIMER button on the Unit repeatedly until “REC” appears on the dis- play.

The Timer indicator ( ) lights up and the “REC” indicator blinks on the display.

2 Press the CANCEL/DEMO button on the Unit.

“OFF” appears and both the Timer indicator ( ) and the “REC” indicator go out.

To activate the cancelled REC Timer:

1 Press the CLOCK TIMER button on the Unit repeatedly until “REC” appears on the dis- play.

The Timer indicator ( ) lights up and the “REC” indicator blinks on the display.

2 Press the SET/DISPLAY button on the Unit.

“ON” appears on the display. The Timer indicator ( ) and the “REC” indicator remain lit, and the display returns to the original display.

6 Setting the volume level.

 

 

Press the ¢or 4button to select the volume level.

 

 

• If the System is unplugged, or a power failure occurs,

MIN, 1-26, or MAX: When the timer is turned on, the Volume

will be automatically faded into the selected volume level.

the timer setting will be lost in a few days. You will

❏ When the volume level is set to MIN, no sound comes out of the

need to reset the clock first, then the timer.

 

 

speakers.

 

 

 

 

7 Press the SET/DISPLAY button.

The timer setting is completed, the display returns to the display before you set the Timer.

23