JVC For TV operations, FTV, Release F TV, 3 Press ENTER, Getting started, 2 Press and hold F TV, Try operating your TV by pressing, Code, Code, turer, Manufac

Getting started

	4 Press number buttons (1-9, 0) to enter
	the manufacturer’s code (2 digits).
	Examples:
Remote control	For a Hitachi TV: Press 0, then 7.
	For a Toshiba TV:Press 2, then 9.
mode selector
	Manufac-	Code	Manufactur-	Code
	turer		er
	JVC	01	Nordmende	13, 14, 18, 26 – 28
	Akai	02, 05	Okano	09
	Blaupunkt	03	Orion	15
(play button)	Daewoo	10, 31, 32	Panasonic	16, 17
	Fenner	04, 31, 32	Philips	10
	Fisher	05	Saba	13, 14, 18, 26 – 28
	Grundig	06	Samsung	10, 19, 32
	Hitachi	07, 08	Sanyo	05
	Inno-Hit	09	Schneider	02, 05
	Irradio	02, 05	Sharp	20
	Magnavox	10	Sony	21 – 25
	Mitsubishi	11, 33	Telefunken	13, 14, 18, 26 – 28
Number	Miver	03	Thomson	13, 14, 18,
				26 – 28, 30
buttons
	Nokia	12, 34	Toshiba	29

5

6

Release F TV.

Try operating your TV by pressing

FTV.

When your TV turns on or off, you have entered the correct code.

If there is more than one code listed for corresponding brand, try each one until you enter the correct one.

NOTE

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

•Set the codes again after replacing the batteries of the remote control.

For TV operations

You can operate your TV using the remote control supplied with this system.

• Refer also to the instruction manuals supplied with your TV.

7To set the manufacturer’s code

You can operate a JVC TV without setting the remote control signal.

1 Slide the remote control mode selector to TV.

2 Press and hold F TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

7Operation

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

The following buttons are available:

FTV:Turns TV on and off.

TV VOL +/–:	Adjusts the volume.
TV/VIDEO:	Selects the input mode (either TV or
	VIDEO).
CHANNEL +/–:	Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN:	Alternates between the previously selected
	channel and the current channel.

15