Playback

This section explains basic operations of DVD player.

For more details about DVD player operations, see pages 37 to 49.

• shows the types of discs the operation is available for.

•Turn on your TV and select the correct input mode on the TV.

IMPORTANT

Before using the remote control for the following operation;

1 Set the remote control mode selector to

AUDIO.

2 Press DVD.

Remote control mode selector

(play button)

Basic playback

7 To load a disc1 Press 0 on the center unit or OPEN/CLOSE on the remote control to open the disc tray.

The system turns on and the disc tray comes out.

2 Place a disc on the disc tray.

With the label side up

When placing an 8 cm disc

7To start playback3 Press 3 (play button).

The system starts playback after closing the disc tray.

You can use the same buttons on the center unit for operations unless otherwise noted.

When loading an MP3 disc

The MP3 control display (A pg. 40) appears on the TV screen and playback starts from the first track in the first group after pressing

3(play button) in step 3. When all tracks in a group have been played, the system starts playback of tracks in the next group.

When loading a JPEG disc

The slide-show* playback starts from the first file in the first group after pressing 3 (play button) in step 3. When stopping playback of a JPEG disc, the JPEG control display (A pg. 41) appears on the TV screen.

* Slide-show

Each file (still picture) is shown on the TV screen for about 3 seconds, then changed to the next file one after another automatically. When all files in a group have been played, the system starts playback of files in the next group.

7To pause playback

Press 8.

To return to normal playback, press 3 (play button).

7To stop playback

Press 7.

To remove a disc

Press 0 on the center unit or OPEN/CLOSE on the remote control.

23