Changing the Display Brightness | Remote | ||
ONLY | |||
You can dim the display window. |
|
| |
DIMMER | DIM 1 | DIM 2 |
|
|
| ||
| DIM OFF |
| |
| (Canceled) |
| |
DIM 1 | Dims the display. |
|
|
DIM 2 | Erases the display illumination. |
Setting the Clock | Remote | |
ONLY | ||
|
Without setting the
•To exit from the clock setting, press CLOCK/TIMER as required.
•To go back to the previous step, press CANCEL.
1Activate the clock setting mode.CLOCK/
TIMER
•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.
2Adjust the hour.SET
3Adjust the minute.SET
Now the
DISPLAY | Clock |
|
Source information
Turning Off the Power
Remote
Automatically ONLY
To turn off the unit after playback is over—Auto Standby
A.STANDBY | ON | OFF |
(Canceled)
When Auto Standby is in use, the A.STANDBY indicator lights on the display.
When the tape or disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically.
•Auto Standby does not work while you are listening to radio and the external component (AUX).
To turn off the unit after a certain period of time —Sleep Timer
1Specify the time (in minutes).SLEEP | 10 | 20 | 30 | 60 | 90 | 120 | 150 |
|
Canceled
2Wait until the set time goes off.To check the time remaining until theSLEEPSLEEP
•If you press the button repeatedly, you can change the shut- off time.
12