When you have trouble

Troubleshooting

Problem
Actions
page
Severe noise or snow
Is the TV connected correctly to the aerial?
Change the direction of the aerial.
Is the aerial or its cable damaged?

Consult your retailer

Patterns, stripes or noise

Is the aerial receiving interference from high-voltage power lines or wireless transmitters?

Consult your retailer

Are connected devices too close to the TV?

Insert the minimum distance between the aerial and the cause of interference until no interference

Ghosting
(Doubling of images)

Are you receiving interference from signals reflected off mountains or buildings?

Adjust the direction of your aerial, or change to a good-quality directional aerial

I can’t turn it on!
Is the power cord connected to the AC outlet correctly?
The remote control doesn’t work!
Are the batteries flat?
Are you more than 7 meters away from the TV?
Is the “MODE (TV, VDR/DVR, DVD, HC)” set to “TV”?
When viewing teletext, the TV menu bar does not appear.

Depending on the stability of the signal, there may be a time lag when changing channels.

Basics
Remote control

 

stops working
Aspect ratio changes unintentionally
Screen
PC screen alignment is off
Poor picture quality

Picture

Strange picture
when using an external device
Poor sound
Sound
No sound from the audio component
Unplug TV, several minutes later plug it in again.
Press “ ” to return to your settings.
Adjust the “PC Position”.

Unnatural colour >>> Adjust “Colour” and “Bright-1”. Check your “Colour System”.

Noise >>> Set to the following functions.
Picture Mode : Standard
Super DigiPure : Max
Dull picture >>> Set to the following functions. Picture Mode : Bright
Super DigiPure : Min
If you connected S-Video output device, check the “S-IN” setting.
If the top of the image is distorted, check the video signal quality itself.

If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace- scanning).

Adjust the “Bass” and “Treble”.
If receiving a poor signal in “Stereo / t·u”, switch to “Mono”.
Adjust the channel reception using “Manual”.
Audio signals received from EXT-5 cannot be sent to the “AUDIO OUT” terminal.

–

ENGLISH

17

IMPORTANT!

 

21

PREPARE

28

 

30

 

28

 

30

 

28

 

30

 

22

USE

 

–

 

–

 

11

SETTINGS

28

 

28

 

–

TROUBLE?

 

31

32