Precautions for installation

Thank you for purchasing a JVC speaker system. Before you begin using these speakers, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer.

Warnings, Cautions and Others

•Do not install the speakers on an uneven surface or in a place subject to vibration; otherwise, they may fall over, causing damage or injury.

–Take the occurrence of earthquakes or other physical shocks into consideration when selecting the installation place, and secure the speakers thoroughly.

•To prevent deformation or discoloration of the cabinet, do not install the speakers where they are exposed to direct sunlight or high humidity, and avoid installation near air conditioning outlets.

•Speaker vibrations may cause howling. Place the speakers as far away from the player as possible.

•The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers.

Then wait at least 30 minutes before turning on the TV’s

main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers further away from the TV.

•Tuner reception may become noisy or hissing if a speaker is installed near the tuner. In this case, leave more distance between the tuner and the speakers or use an outdoor antenna for better tuner reception without interference from the speakers.

Precautions for Daily Use

•To maintain the appearance of the speakers

Wipe with a dry, soft cloth if the cabinet or control panel should become dirty.

If very dirty, apply a small amount of water or neutral detergent to the cloth and wipe clean, then wipe with a dry cloth.

•To improve the sound field

If the speakers are facing a solid wall or glass door, etc., it is recommended to furnish the wall with materials that absorb sounds, for example by hanging up thick curtains, to prevent reflections and standing waves.

•To use the speakers without any trouble

–Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat buildup.

–When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury.

–When holding a satellite speaker, do not grasp the speaker (upper) portion, but always grasp the leg (lower) portion of the satellite speaker.

Checking the supplied Accessories

Check to be sure you have the following supplied accessories. The number in parenthesis indicates the quantity of the piece supplied.

•Speaker cords

Approx. 6 m (19.7 feet) (3: for satellite speakers placed in front position and a center speaker)

Approx. 15 m (49.2 feet) (2: for satellite speakers placed in rear position)

•Screws

M5 x 12 mm (M5 x 1/2 in.) (4)

M4 x 25 mm (M4 x 1 in.) (12)

•Washers

(4)

If any of the items above are missing, contact your dealer immediately.

Speaker and Speaker cords— to improve the sound quality

About DD (Direct Drive) speaker

DD(Direct Drive) technology improves sound localization and transmits the powerful sounds.

About the OFC cord

The core wires of the supplied speaker cords are made of OFC (Oxygen Free Copper). This OFC cord enables high quality sound reproduction.

When connecting the speaker cords

Make sure to match the polarity (ª and ·); otherwise, the sound will lose the surround effect.

After connecting, check that the exposed cores are fully inserted into the terminal.

When using other speaker cords

Observe the following;

•Buy thick speaker cords rather than thin cords, and make them as short as possible for connection.

•Use speaker cords of the same length for both left and right speakers.

•Do not use long speaker cords; otherwise, the sound quality may deteriorate.

Speaker grille

Leg

Speaker cord

Satellite speaker

English

– 2 –

SX-XD33 specifications

The JVC SX-XD33 is a premium pair of headphones designed to deliver a remarkable audio experience, catering to both audiophiles and casual listeners alike. These headphones combine cutting-edge technology with user-friendly features to create an immersive sound environment.

One of the standout features of the SX-XD33 is its innovative use of JVC's exclusive driver technology. The headphones are equipped with large 40mm neodymium drivers that provide powerful bass response and clear midrange and treble frequencies. This ensures that every note, from the deepest bass lines to the crispest highs, is reproduced with impressive accuracy, making it ideal for various music genres.

Additionally, the SX-XD33 boasts a lightweight and comfortable design. The ear cups are generously padded with soft materials, allowing for extended listening sessions without discomfort. The adjustable headband ensures a secure fit, making these headphones suitable for both home use and on-the-go listening.

Noise isolation is another significant characteristic of the JVC SX-XD33. The design effectively reduces external ambient sounds, allowing users to fully immerse themselves in their favorite music. This feature is particularly valuable in noisy environments, such as public transport or crowded areas, where distractions can disrupt the listening experience.

The SX-XD33 is also equipped with a foldable design, making it easy to store and transport. The compact form factor is perfect for users who travel frequently or simply want a pair of headphones that doesn't take up much space when not in use.

Moreover, the headphones feature a detachable cable, which enhances durability and allows for easy replacement if needed. This feature ensures that wear and tear from regular use can be managed without the need to replace the entire headset.

For connectivity, the SX-XD33 uses a standard 3.5mm audio jack, allowing compatibility with a wide range of devices, including smartphones, tablets, laptops, and portable music players. While not wireless, many users prefer the reliability and sound quality that wired connections provide.

In summary, the JVC SX-XD33 headphones are a well-rounded audio solution that emphasizes sound quality, comfort, and convenience. With their impressive driver technology, noise isolation capabilities, and portable design, they cater to a diverse audience of music lovers seeking an enhanced listening experience.

JVC SX-XD33 manual Precautions for installation, Precautions for Daily Use

Models: SX-XD33