Creating Realistic Sound Fields
■Basic sound adjustment procedure
Ex. : To adjust the front speaker balance
From the remote control ONLY:
1Play the disc you want to use for the sound adjustment.
2 Press SOUND repeatedly until “FRONT | SOUND |
| |
BALANCE” and the adjustment bar |
|
appear on the TV screen. |
|
Each time you press the button, the adjustment indication on the TV screen changes as follows:
FRONT BALANCE | L |
|
|
| R | ||
|
| L |
|
|
| R | |
|
|
|
|
| |||
REAR BALANCE | |||||||
|
|
| |||||
|
|
|
CEN LEVEL 0dB
REAR LEVEL 0dB
S/W (subwoofer) LEVEL 0dB
BASS 00dB
TREBLE 00dB
*1: No adjustment bar appears on the TV screen when you adjust the delay time. Refer to the display on the center unit to adjust the delay time.
*2:
*3:
There is a time limit in doing the following steps. If the setting is canceled before you finish, press SOUND and start from step 2 again.
3 Press 3 or 2 to adjust the output balance
•You can also adjust the sound setting referring to the display on the center unit. Refer to the display indication when you want to adjust the sound using sources other than discs.
Sound adjustment indication on the display
Ex.: Front balance
L C R
SW
LS RS
|
|
|
|
Left front level | Right front level |
Ex.: Center level
L C R
SW
LS RS
Center output level
Ex.: Rear delay time
L C R
SW
LS RS
Rear delay time
4Repeat steps 2 and 3 to adjust the other items.
•On delay time adjustment
You can adjust and store the delay time setting for each surround mode. Select the surround mode you want to adjust before starting delay time adjustment.
•Adjustable range
Digital Multichannel | ||
Surround: | ||
|
|
|
Dolby Pro Logic II modes | ||
|
|
|
| PLII MUSIC: | 0 msec to 15 msec |
|
|
|
| PLII MOVIE: | 10 msec to 25 msec |
|
|
|
| PLII MATRIX: | 0 msec to 15 msec |
|
|
|
| PRO LOGIC: | 10 msec to 25 msec |
|
|
|
1 msec increase (or decrease) in delay time corresponds to 30 cm increase (or decrease) in distance.
| Center speaker |
Left front | Right front |
speaker | speaker |
| Subwoofer |
| 3.0 m |
| 2.7 m |
| 2.4 m |
3: Decreases the left speaker output, or
ENTER
2.1 m |
restores the right speaker output.
2: Decreases the right speaker output, or restores the left speaker output.
Left rear | Right rear |
speaker | speaker |
Ex. : In this case, set
16