Installation
Mounting the Camera (Continued)
mConnection
1Attach the fall prevention wire from the ceiling to the camera (fall prevention wire is not included)
2Connect the coaxial cable (A page 10)
Lower the protection cover and connect the connectors.
Upon connecting, restore the protection cover to cover the connectors. This will isolate and protect the metallic parts of the connectors from the ceiling structures.
3Connect the power supply cable (A page 11)
4Wrap insulation tapes around the connecting parts of the power supply cables
Memo Wrapping insulation tapes will improve future work conditions, as well as reduce penetration by noise and other objects.
|
| Power cable |
1 |
|
|
Fall prevention wire |
| 3 |
|
| |
| 2 | Solder or caulk |
|
| |
Protection cover |
|
|
Coaxial cable |
| 4 Insulating tape |
14