Basic Menu Operations (cont.)

7Displaying the Menu

Screens

To display MAIN MENU

Press the MENU control on the front panel.

To display SET-UP MENU

Press the CHROMA/PHASE button while moving the MENU control to .

NOTES:

To exit the menu, press the MENU control several times.

The menu automatically exits about 30 seconds after the last menu operation.

To go back to the previous menu, press the MENU control.

7Menu Operation Procedure

7About “ sub menu”

When “ sub menu” is displayed in the menu, only selected item in that menu can be displayed and adjusted. This allows you to make adjustments while looking at the actual screen.

1. Select “ sub menu,” then move the MENU control to .

The adjustment bar is displayed at the bottom or top of the screen.

1. Press the MENU control.

MAIN MENU is displayed on the screen.

2.Move the MENU control to / to select the item you want to set, then

move it to .

The menu screen of the selected item is displayed on the screen.

(Ex.)

2.Move the MENU control to / to select the item you want to set.

3.Move the MENU control to / to make adjustments.

To exit the sub-menu display:

Press the MENU control.

To change the positions and the contents of the sub-menu display

Select “sub menu SELECT” in MAIN MENU, then change the setting by moving the MENU control to / .

UPPER1: The current setting and adjustment bar appear at the top of the screen.

LOWER2: The current setting appears at the

bottom of the screen.

UPPER2: The current setting appears at the top of the screen.

LOWER1: The current setting and adjustment bar appear at the bottom of the screen.

3.Move the MENU control to / to select the item you want to adjust.

4.Move the MENU control to / to

make adjustments.

(Ex.)

5.Press the MENU control several times to exit MAIN MENU.

7About “reset”

Restores all menu settings (currently displayed) to factory-preset values.

1.Move the MENU control to / to select “reset,” then move it to .

Confirmation message is displayed.

2.To initialize, move the MENU control to .

To cancel the initialization, press the MENU control.

NOTE:

This function is only available when “reset” is displayed in the menu.

10