How to Use SET-UP MENU (cont.)

7Functions and Adjustment Range of Items

FUNCTION SETTING

Sets the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME, colors of the tally lamp, groups of the audio output modes, and MAKE/TRIGGER terminal.

•Can be also used to check the amount of time that the monitor has been used.

7COLOR SYSTEM Selects the color system.

AUTO: Changes NTSC and PAL automatically.

NTSC: Keeps the color system NTSC.

PAL: Keeps the color system PAL.

NOTE:

•Normally select “AUTO.” However, if the input signal is unstable, select “NTSC” or “PAL.”

7SYNC SELECT

Selects the synchronized signal.

INT.: The input video signal is synchronized with the built-in sync signal.

EXT.: The input video signal is synchronized with an external signal from an external sync terminal.

7RUSH DELAY TIME

Sets the delay time between when the stand-by button is pressed and when the monitor actually turns on.

STD.: Power turns on about 1 second after the stand-by button is pressed.

SLOW: Power turns on about 3.2 seconds after the stand-by button is pressed.

NOTE:

•It is recommended to apply “SLOW” to some of the monitors if you need to turn on multiple monitors at the same time. You can control the rush current of the entire system.

•The tally lamp is controlled using the MAKE/TRIGGER terminal of the REMOTE (external control) terminals.

☞“How to Use the MAKE/TRIGGER Terminal” on pages 18 and 19

7REMOTE SYSTEM

Sets the MAKE/TRIGGER terminal.

☞“How to Use the MAKE/TRIGGER Terminal” on pages 18 and 19

•CONTROL FORM:

Selects the control system for the MAKE/ TRIGGER terminal.

MAKE: Selects the make contact system as

the external control method. TRIG.: Selects the trigger system as the

external control method.

SET: You can apply the functions to the 1st to 6th pin terminals of the MAKE/ TRIGGER terminal as you want.

•PORT F1 – PORT F6:

Selects the function to be applied to the 1st to 6th pin terminals of the MAKE/TRIGGER terminal.

☞“How to Use the MAKE/TRIGGER Terminal” on page 18

NOTE:

•You can set “PORT F1” – “PORT F6” only when “CONTROL FORM” is set to “SET.”

7E. AUDIO GROUP

Sets the group of the available audio output modes selected by the MENU control.

1G:

2G:

1-2G:

•When SD SDI signal (including EMBEDDED AUDIO signal) is input, you can select the channel of the audio signal output from the audio output terminal by changing the audio output mode.

☞ “6 Audio output terminals” on page 7

7TALLY SELECT

Selects the color of the tally lamp on the upper right of the front panel.

GREEN: The tally lamp lights in green.

RED: The tally lamp lights in red.

NOTES:

•“TALLY SELECT” does not appear on the menu when both of the following conditions are applied:

–When selecting “TA. SEL” to a pin terminal of the MAKE/TRIGGER terminal in “REMOTE SYSTEM” of

SET-UP MENU.

–When the external control is activated.

☞“REMOTE SYSTEM” on the right column, “How to Use the External Control” on pages 18 and 19

7HOUR METER X100h

Displays the total usage time of the monitor in hundred-hour units.

• 000 O 655

NOTES:

•When the timer passes 655, it returns to 000.

•The timer does not count usage time under one hour.

14