•When
7BAR TYPE
Selects the color of the AUDIO LEVEL METER display.
W. 100: White color display
W. 50: White (half transparent) display
3COLORS: The AUDIO LEVEL METER display uses three different colors (red, yellow and green) to indicate variations in input levels.
Red: Displayed when the audio input is at the same level set in “OVER LEVEL” or higher.
Yellow: Displayed when the audio input is at the same level set in “REFERENCE LEVEL” or higher.
Green: Displayed when the audio input is lower than the level set in “REFERENCE LEVEL.”
NOTES:
•For “W. 100” and “W. 50,” the line indication for the standard input level set in the “REFERENCE LEVEL” is displayed. Input level set in the “OVER LEVEL” is not displayed.
•As for the audio channel bar display with no signal input, white is displayed for the “3COLORS” setting, and gray is displayed for other settings.
7BAR BRIGHTNESS
Selects the brightness of the AUDIO LEVEL METER display.
HIGH: Brighter
LOW: Darker
7REFERENCE LEVEL
Sets the standard input level.
•
7OVER LEVEL
Sets the input level’s lower limit indicated in red for the “3COLORS” display.
•
CONTROL LOCK
Prohibits altering the monitor operations except turning the monitor on/off and deactivating this function.
• ON/OFF
NOTES:
•When “CONTROL LOCK” is set to “ON,” “
Control lock on!” appears on the screen if you try to operate the monitor.
•Operating the monitor by the external control is available if this function is activated.
all reset
Resets all the settings you have made to
•Adjustments made by using the front panel buttons will also be reset.
1.Move the MENU control to 
/ 
to select “all reset,” then move it to 
.
Confirmation message is displayed.
2.To initialize, move the MENU control to 
.
•To cancel the initialization, press the MENU control.
17