JVC TM-A140PN-A BASIC CONNECTION EXAMPLE, 7VIDEO A Connection Example (Select Input A button), 7VIDEO B Connection Example (Select Input B button), ENGLISH

BASIC CONNECTION EXAMPLE

Notes:

●Before connecting your system, make sure that all units are turned off.

●The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.

●Each pair of input (IN) and output (OUT) terminals are bridge-connected. However, the Y/C input terminal (Y/C IN) has no output terminal (OUT) corresponding to it.

●If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).

●When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.

(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video signal “looping” between the VCRs, and is not a malfunction.)

●Select the video input (Input A or Input B) with the input select button on the front panel.

7VIDEO A Connection Example (Select Input A button)

7VIDEO B Connection Example (Select Input B button)

Video Camera
	Video Monitor		VCR
Video		Audio
(Video signal cable)		(Audio signal cable)

	VIDEO			AUDIO
A	B		A	B
IN	IN	Y/C IN
			IN
OUT	OUT		OUT
	Video			Audio
	(Video signal cable)			(Audio signal cable)

Video Monitor VCR

: Signal Flow

Video Camera		Video Monitor			VCR
	Video		Y/C (S-video)		Audio
	(Video signal cable)		(Y/C (S-video) signal cable)		(Audio signal cable)
	VIDEO			AUDIO	ENGLISH
	A	B		A
IN	IN		IN
				IN
OUT	OUT			OUT
		Video			Audio
		(Video signal cable)			(Audio signal cable)

Video Monitor VCR

: Signal Flow

11