ENGLISH

Attaching the front speakers to the GM-X50 series display

Using the speaker brackets, you can attach the front speakers to the side of the display.

•Do not loosen the screws other than the protective screws.

•Use only the supplied mounting screws for attaching the front speakers.

1.Remove the protective screws on the back of the display with phillips screwdriver.

Protective screw

Protective screw

2. Attach the front speaker to the back of the display.

1 Turn the mounting screws with phillips

2 Hook the speaker bracket onto three mounting screws

screwdriver, leaving a length of about 3 mm.

through the screw holes (A), and slide it down.

Screw hole (A)

3. Tighten the mounting screws firmly with phillips screwdriver.

•When moving the display, do not hold the speakers.

•The speakers are not of anti-magnetic type.

Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers.

2