Menus

Settings:  [  ] = Factory-preset

@[AUTO]: White balance is adjusted automatically.

3 MANUAL:

B MWB: Adjusts the white balance manually depending on the light source.

=WB

1)

Hold a sheet of plain white paper in front of

Adjusts the white balance to

 

the camera so that the white paper fills the

achieve the optimum colors

 

screen.

for the amount of light in your

2)

Keep touching OK until the B indicator

surroundings during recording.

 

appears.

DFINE: When shooting outdoors on a sunny day. E CLOUD: When shooting outdoors on a cloudy day.

F HALOGEN: When a video light or similar type of lighting is used.

-BACKLIGHT COMP. 1 [OFF]: Deactivates the function.

Backlight compensation

0 ON: Activates the function.

brightens the subject by

increasing the exposure.

 

 

 

 

 

PHOTOMETRY AREA

6 [WHOLE SCREEN]: Brightness is adjusted automatically

for whole screen.

Enables you to adjust the

7 SPOT: Brightness for the specified spot is adjusted

brightness in the desired spot

when backlight compensation

automatically.

Move the spot frame left and right by touching & or %,

does not work well.

 

then touch OK.

 

 

 

(! mode only)

1 [OFF]: No effect is used.

J SEPIA: The image has a brownish tint like old still images.

w EFFECT

K MONOTONE: The image becomes black and white like old

movies.

Enables you to record videos or

L CLASSIC FILM: This effect skips frames to give images of

still images with special effects.

an old movie atmosphere.

 

M STROBE: The image looks like a series of consecutive

 

snapshots.

 

1 [OFF]: Normal shooting (Enables close-up shots up to the

 

distance stated below)

 

Tele (T) side: Approx. 50 cm (1.64 ft)

5 MACRO

Wide (W) side: Approx. 50 cm (1.64 ft)

Enables you to shoot a

0 ON: Macro shooting (Enables close-up shots up to the

subject as large as possible

distance stated below)

at a distance of approx. 4 cm

Tele (T) side: Approx. 30 cm (0.98 ft)

(1.58 in).

Wide (W) side: Approx. 4 cm (1.58 in)

 

 

 

NOTE

 

 

Set [MACRO] to [OFF] if you will not take close-up still images.

 

Non-close-up still images will be blurred if [MACRO] is set to [ON].

NOTE

Depending on the operation mode, some menu settings may be fixed and are unavailable for selection. In this case, it will be displayed in gray.

EN 35