IP address setting at the computer

Set the computer to an IP address that enables communication with VN-V686U.

1 Click [Start]

●Select in the sequence of [Control Panel]-[Network Connection]-[Local Area].

2 The computer on which Internet Explorer is launched automatically selects the connected network

●Right-click and select [Properties].

●Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check boxes are selected.

3 Select [Internet Protocol(TCP/IP)] and click [Properties]

4 Set the IP address

ASelect [Use the following IP address].

B Specify the [IP address]. (For example, use 192.168.0.100 when VN-V686U is in its default settings and there is no DHCP server.)

Memo:

Make sure that you take note of the original IP address before altering.

Note:

Ensure that a duplicate IP address is not specified within the same network environment.

C Set [Subnet mask] to a value that is appropriate for the setting operation. Consult the network administrator if you have any queries.

(Use 255.255.255.0 when VN-V686U is in its default settings and there is no DHCP server.)

D When a [Default gateway] is present, make use of the corresponding IP address (e.g., 192.168.0.254).

E Click [OK].

5 Click [OK] on the [Local Area Connection Propertise] screen

27