Title Bar | For setting display items on the viewer screen. | |
|
| For the MPEG4 Viewer, characters are displayed in the title bar of the |
|
| window. |
|
|
|
| A Camera ID | Select AOnB to display [Camera ID]. |
|
| [Camera ID] can be specified on the [Basic Settings1] or [Camera] page |
|
| of |
|
|
|
| B Position Title | Selecting AOnB displays the Position Title. |
|
|
|
| C Time | Select AOnB to display the time. |
|
|
|
| D Format | Select the format for displaying time. |
|
| YYYY, MM, and DD denote year, month and day respectively, while HH, |
|
| MM, and SS denote hour, minute and second respectively. mm is |
|
| equivalent to 1/100 seconds. |
|
|
|
Stream Settings For specifying settings for receiving MPEG4 stream.
A Stream | For selecting the protocol when the viewer acquires data from |
| |
| When AHTTPB is selected, lost packets are recovered via resending. |
| |
|
| ||
| AMulticastB is selected. |
| |
| When playing back via multicast., start multicast sending on the |
| |
| [Streaming] page of the |
| |
| Note: |
|
|
|
|
| |
| ● When |
| |
| Windows firewall warning may appear. In this case, select AunblockB |
| |
| and proceed. |
| |
| ● If AblockB is selected, the Windows firewall will block the multicast |
| |
| stream and playback of multicast by the viewer will fail. |
| |
|
|
| |
|
|
| |
B HTTP Port | You can change the HTTP port number. |
| |
| The default port number setting is 80. |
| |
| Specify the same value as the parameter that is set on the [Protocol] |
| |
| page of |
| |
|
|
| |
C Multicast IP | You can change the multicast IP address. |
| |
Address | The default address is 225.0.2.1. |
| |
|
| ||
D Multicast Port You can change the multicast port number. The default port number setting is 59152.
This is enabled when [Start] is selected for the [MPEG4 Control] item on the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming] page of
101