Setting Using Internet Explorer

Setting (continued)

PTZ Page

Set the movement for AAuto ReturnB, AZoom LimitB and APreset PositionB.

This page can be used during access using AadminB or AoperatorB..

●First of all, configure the encoding settings.(A Page 39)

●Click [Advanced Settings] to display setting menu.

●Click [PTZ].

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

Note:

●This feature can be used when the distribution size pattern setting on the Encoding page is set to A (MPEG4 only), C (MPEG4 only), D (JPEG only), F, or H. (A Page 39)

Click

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A Auto Return

Restores automatically to the state specified under [Mode] when action is

 

 

 

 

 

not performed on the manually operated camera over the interval specified

 

 

 

 

 

in [Return Time].

 

 

 

 

 

 

Mode

For setting the action after Auto Return.

 

 

 

 

 

None

: Auto Return disabled.

 

 

 

 

 

HOME

: Returns to the home position.

 

 

 

 

 

Auto Patrol: Restores the auto patrol action.

 

 

 

 

 

 

Return Time

For setting the time interval before restoring the action via Auto return.

 

 

 

 

 

[Set values: 1 minutes, 2 minutes, 3 minutes, 5 minutes, 10 minutes,

 

 

 

 

 

 

20 minutes, 30 minutes, 60 minutes]

 

 

 

 

 

 

Test

Click [Execute] to perform a test execution of the preset Auto Return action.

 

 

 

 

 

 

B Limit

 

 

 

 

 

 

 

 

 

 

Zoom Limit

Set maximum value of electronic zoom feature.

 

 

 

 

 

[Set values:1 , 2 , 4 , 8 ]

C Preset Position

For adjusting the speed of movement to the Preset Position.

 

 

Speed

This is also applicable to movement to the Preset Position in the Auto Patrol

 

 

 

 

 

mode.

 

 

 

 

 

 

 

 

 

Speed

[Set values:Moment, Low, Mid, High]

 

 

 

 

 

 

 

 

 

58