Auto Patrol Page
Perform Auto Patrol setting to switch image display between multiple positions according to the interval that has been set.Set when viewing registered positions in order.
This page can be used during access using AadminB or AoperatorB.
●First of all, configure the encoding settings.(A Page 39)
●Click [Advanced Settings] to display setting menu.
●Click [Auto Patrol].
●Register position using PTZ feature.(A Page 95)
●Press the [OK] button to enable the new settings.
●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Note:
●This feature can be used when the distribution size pattern setting on the Encoding page is set to A (MPEG4 only), C (MPEG4 only), D (JPEG only), F, or H. (A Page 39)
Whole shooting range HOME（No ０）
Position 2 No ５
Position 4 No ４
Position１
No 1
Position ３
No ２
Position ５
No ３
No.0(HOME) | No. 1 (Position 1) | No. 2 (Position 3) |
No. 5 (Position 2) | No. 4 (Position 4) | No. 3 (Position 5) |
59