JVC user manual WR-DVXUMarine Case, Names of the parts, Pre-use test, Please read before use

For GR-DVX

Digital Video Camera

WR-DVXUMarine Case

User’s Manual ENGLISH

Names of the parts

	1	2
		3
		4
	2	5
		6
1	.......... Marine case front lid
2	.......... Buckle
3	.......... Power dial
4	.......... START/STOP button
5	.......... Zoom lever
6	.......... SNAPSHOT button

Please read before use.

This marine case is a precision instrument designed to permit safe video recording under high water pressure. Please pay careful attention when handling the unit before and after use, as explained in this user’s manual.

Each part of the marine case has been subject to strict controls during the manufacturing process, and the individual functions have faced stringent tests during the assembly process. Each marine case has also had to pass water-proof inspections using high- pressure water testers. However, damage can some- times occur during transport and distribution, or during storage after purchase, so before diving always carry out the following pre-use test to verify safety.

Pre-use test

When using the marine case for the first time after pur- chase, or after it has been in storage for a long time, dive to the usage depth with only the empty marine case (without mounting the camcorder inside), and test for water leaks.

Mounting method and operating method for each part

1.Remove the four buckles on the marine case and open the front lid.

2.Remove the camcorder hand strap or grip strap.

3.Open the LCD monitor, then insert the camcorder into the marine case.

4. Position so that the power dial projection in the marine case pushes the lock button located on the camcorder power dial.

5. Turn the marine case power dial to the left to move the camcorder power dial to the “ A ” position.

6. Place the included anti-
fogging silica gel in the
gap between the
camcorder and the marine
case to prevent fogging in	2
the marine case.		1
7. Before sealing the marine
		3
case, check that there is no
sand, dirt, or other foreign

matter on the O-ring

mounted on the front lid or on the O-ring contact surface on the main unit.

Also make sure that the inserted silica gel bag is not pinched. If you dive with foreign matter trapped in these areas, water will leak.

8.Check that the O-ring on the front lid is correctly mounted in the groove, then press in the front lid. Flip down the four buckles in the directions indicated by the arrows in the figure on the right to seal the marine case.

9. Press the START/STOP button once to start recording from the camcorder (1 in the figure on the right). Press the button again to stop recording (1 in the figure on the right).

10. The zoom can be adjusted with the zoom lever (2 in the figure on the right).

11.It is possible to take a snapshot using the SNAPSHOT button (3 in the figure on the right).

12. When you are finished	4
shooting, turn the power
dial to the right to switch
the camcorder power dial
to the Off position (4 in
the figure on the right).

LYT0002-0Q9A