JVC XL-FZ258BK, XL-FZ158BK manual Locating a point to start playback

Locating a point to start playback

Skipping to a desired disc

Use the DISC SKIP button.

Main unit Remote control unit

DISC SKIP

DISC SKIP

Each time the DISC SKIP button is pressed, the selected disc number switches from 1 to 5, then back to 1.

Skipping to a desired track

Use the 4/¢ buttons.

Main unit	Remote control unit
1 SEARCH Á	4	¢
4 ¢

To skip back to the beginning of the track being played, tap the 4 button. When the beginning of the track is reached, tapping this button again skips to the previous track.

To skip to the next track, tap the ¢ button.

When using the 4/¢ SEARCH buttons on the main unit, tap them until the desired track appears.

Searching for a desired section

Keep the 1/Á button pressed during playback.

Main unit		Remote control unit
1 SEARCH Á		1	Á
4	¢

Playback advances or reverses rapidly.

While the 1button is kept pressed, playback rapidly reverses toward the beginning of the track. While the Á button is kept pressed, playback rapidly advances toward the end of the track. When the desired section is reached, release the button. The player resumes normal playback from that point.

BASIC OPERATIONS

Specifying a desired disc

Use the DISC buttons (1-5).

Main unit				Remote control unit
		DISC		DISC 1	2	3
1	2	3	4	5	5
				4

To select a disc, press the desired disc number (1-5). The unit searches for the selected disc and playback starts automatically.

Note

If no disc is loaded in the selected disc tray, the indicator of that disc is turned off within about 4 seconds and then playback starts from the next disc.

Specifying a desired track (for XL-FZ258BK)

To specify the desired track number, use the track buttons (1-10, +10).

Main unit						Remote control unit
1	2	3	4	5		TRACK 1	2	3	4
6	7	8	9	10	+10	5	6	7	8
						9	10		+10

The unit searches for the selected track and playback starts automati- cally.

When selecting track number 10 or less, press the corresponding track button. When selecting track number 11 or above, use the [+10] button.

Example: To select track number 12, press [+10] and then [2].

To select track number 25, press [+10] twice and then [5]. To select track number 30, press [+10] twice and then [10].

Note

If the selected track number does not exist on the selected disc, playback starts from the first track on that disc.

Page 8